forklift truck ready fork pick-up: need to adjust the spacing of fork arm. if the fork spacing is too narrow, the goods are easy to lose balance and overturn; if the fork spacing is too wide, the goods are not easy to cross or break. choose the correct fork direction.
the first step is to approach the forklift slowly and brake gently so that the forklift stops in front of the goods.
secondly, raise the forklift arm of the forklift truck to a proper height and adjust the forklift arm of the forklift truck to be parallel to the ground.
the third step is to start the forklift slowly until the forklift arm fully enters the forklift. at this time, the fork arm should be parallel to the tray, not friction with the tray.
fourthly, lift the cargo 5-10 cm to check the stability and distribution of the cargo, and prevent the cargo from rolling over.
step 5: slow down until the goods are completely removed, otherwise do not move sideways or turn.
step 6: place the cargo on the back fence of the fork arm, lift the fork arm 15-20 cm above the ground, and tilt the door arm as far as possible before turning the fork.
when picking up goods, pay attention to forklift trucks: forklift trucks should remain stationary when lifting the forklift arm, unless the position is being adjusted; when goods are lifted to a higher position, do not move, rotate and tilt the forklift arm at will, otherwise the forklift truck may overturn. if the goods may fall on the canopy, do not pile them up.